MCU 5310
connect to the company website
Search/Print  Help contents
You are here:

Adding a custom auto attendant banner

You can add a custom banner image to any auto attendant configured on the MCU as follows:

  1. Go to Conferences.
  2. Click the Auto attendants tab.
  3. Click the name of a configured auto attendant.
  4. Click the Banner tab.
  5. Refer to the table below to determine the most appropriate settings.

 

Field Field description Usage tips
Auto attendant banner
Default

Chooses the default MCU graphic to use for your banner.

 
Specific to this auto attendant

The custom banner identified for this auto attendant. Click Remove banner to remove this graphic as the banner. Click Update after uploading a new graphic.

Nothing displays here until you upload the custom graphic as described below.

Banner upload
Banner for this auto attendant

The custom graphic to be used for a banner. Click Browse to locate the file on your hard drive.

The image file can be a JPEG, GIF or Windows BMP format with a maximum size of 1600 x 1200 pixels. If the file is smaller than this size, the MCU will scale it to fill the banner area previously occupied by the Cisco logo. Click Upload new file to display.

Note: There is a 90KB file size restriction on all platforms.

Related topics



(c) Copyright Cisco Systems 2003-2014, License information